E: [email protected], T: 03 700 15 03
Product number: 15066
The LANCMAN STX 26 MULTISPEED vertical wood splitter is the most powerful model in the STX series, intended for the most demanding users who require maximum power and high productivity in firewood preparation. With a splitting force of 26 tons, it easily splits even the largest logs up to Ø 95 cm in diameter and 117 cm in length.
It is equipped with the MULTISPEED system, which enables automatic speed regulation depending on the load:
at lower load the splitter works faster
at higher load it switches to slower operation with more force
Available drive versions:
C GP – PTO drive with cast iron pump (larger oil volume for faster operation)
EL – electric motor
C+EL – combined drive (PTO + electric)
Optionally, the XTREMSPEED system is also available (for EL version), which increases splitting speed by up to 50%.
The STX 26 MULTISPEED has a strong construction, an advanced hydraulic system and a HARDOX wedge, which ensures longer service life and better splitting.
Safety solutions in accordance with EN standards guarantee safe use even in professional environments.
Designed and manufactured in Slovenia.
professional vertical wood splitter
splitting force 26 tons
MULTISPEED system – automatic speed adjustment
fast splitting of smaller logs, slower and stronger for harder logs
drive versions: C GP, EL, C GP+EL
splitting logs up to Ø 95 cm and 117 cm length
robust and stable construction for long-term professional use
safety solutions according to EN standards
designed and manufactured in Slovenia
MULTISPEED (standard in this version)
wedge stroke: 110 cm, max. splitting length: 117 cm, max. log diameter: 95 cm
log lifter, side arm, suction filter
chainsaw holder, pickaxe holder, axe holder
main wedge designed at 3.5° angle for easier splitting (draws the log under the wedge during splitting)
HARDOX wedge
quick cylinder locking from transport to working position and back (without tools)
hydraulic winch for log pulling with mechanical control or with remote control, automatic end stop
The tonnage rating indicates the maximum force that the hydraulic cylinder can generate during splitting. The wedge (axe) presses directly onto the log and splits it. For the splitter to reach its full force, the wedge must be braced against a solid, fixed stop, which allows the hydraulic pressure to be converted into actual splitting force.
Technically, the force of a splitter is measured in kiloNewtons (kN). Example:
1 kN = approximately 0.102 tons of force
200 kN ≈ 20 tons of force
This means that a 20-ton rating corresponds to about 200 kN of pressure exerted by the wedge on the log. The actual force applied, however, is proportional to the resistance of the wood – softer logs require less pressure, while harder or knotty logs require more.
Information and contact
Company
Shopping
© 2023, Gomark d.o.o., vse pravice pridržane.
